Consultez les proceedings de la Conference COMSOL 2020
The Helmholtz Coil generates a uniform magnetic field. The commercially available large-size Helmholtz coils prove to be very expensive. This paper describes the economical method of designing and construction of a Helmholtz coil. COMSOL Multiphysics AC/DC Module simulated results and ... En savoir plus
This elaboration presents the Active Magnetic Suspension (AMS) and radial Active Magnetic Bearing (AMB) as a representative of the Active Magnetic Levitation Systems (AMLS). The laboratory test rigs are analyzed in the 2D space. The control algorithm as well as the motion dynamics are ... En savoir plus
This paper presents a numerical study of the deposition of spherical charged nanoparticles caused by convection and Brownian diffusion in a pipe with a cartilaginous ring structure. The model is supposed to describe deposition of charged particles in the upper generations of the ... En savoir plus
In this work, a COMSOL model that predicts velocity and concentration fields inside an X-shaped millichannel (4 mm diameter) is developed. Water and a ink low concentration are injected simultaneously in the two inlets of the device. The mass transfer problem is solved by a Fickian ... En savoir plus
In this paper, we present a first model carried out with COMSOL Multiphysics to model bread baking, considering heat and mass transfer coupled with the phenomenon of swelling. This model predicts the pressures, temperatures and water contents evolutions in the dough for different energy ... En savoir plus
The tensile strength of masonry is relatively low compared to its compressive strength and is affected by the direction of the joints and their filling. In masonry with modern thin layer mortar (joint thickness 3 to 5 mm) sometimes the head joints are left open. A total of 13 model-walls ... En savoir plus
This paper presents preliminary estimations of CO2 overpressure into the reservoir and CO2 leakage through the caprock and the overburden. A simple, two-phase flow model in porous media based on Darcy’s law was used, in order to explore easily long time periods. The models produced by ... En savoir plus
The majority of power transformer high voltage bushings today are of the condenser oil impregnated paper (OIP) type. The ingress of moisture, through the deterioration of the bushing over time, can result in a significant reduction in life and is a major failure mode of these bushings. ... En savoir plus
Results of simulations on flow and heat transfer in a porous Silicon Carbide honeycomb structure applied as a solar air receiver are presented. In this application porous materials are put in concentrated solar radiation. Flux densities of up to 1000 MW/m² are reached. Simultanously, ... En savoir plus
This study highlights the possibility of using COMSOL Multiphysics for solving large scale PEM fuel cell stack models in the order of several million degrees of freedom (DOF). First, different gas flow channel configurations are solved in order to highlight the fluid flow and pressure ... En savoir plus