Consultez les proceedings de la Conference COMSOL 2024
PECM is a necessary extension to traditional ECM for some high-performance materials. Electrolyte flow in the inter-electrode gap (IEG) can be assisted using a magnetic field to allow higher currents, but this creates a magnetohydrodynamic flow. This paper presents a study of flow ... En savoir plus
For the commercialization of membraneless microfluidic fuel cell, voltage and minimum power demand for various applications need a precise selection of fuel and oxidant flow rates to achieve the optimum cell performance. A numerical study on a membraneless microfluidic fuel cell was made ... En savoir plus
Electrochemical machining (ECM) is a manufacturing technology that allows metal to be precisely removed by electrochemical oxidation and dissolution into an electrolyte solution. ECM is suited for machining parts fabricated from “difficult to cut” materials and/or parts with complicated ... En savoir plus
A finite element model for underground corrosion is presented. The model is capable of predicting regions experiencing high levels of corrosion due to differential aeration and helps identify "corrosion hotspots" where physical examination of the buried asset is not feasible. ... En savoir plus
A laboratory-scale electrolysis cell for the recovery of metals is simulated with COMSOL Multiphysics® software. Two models are implemented: an electrical model simulating the current density (reaction rate) distribution at the electrodes and a laminar bubbly flow model which solves for ... En savoir plus
The objective was to make a visualisation application for the pupil's lab of the University of Applied Sciences Bielefeld. The application serves as a supplement for a workshop. It should provide a better understanding of a fuel cell, to visualize important influences and collect first ... En savoir plus
Lithium ion battery safety problem has attracted the whole world’s attention essentially after the explosion of Samsung Note 7. This work mainly deals with the study of the generation, characteristics and prevention measures of the battery fire. Firstly, the heat generation rate of ... En savoir plus
The thermal behavior of lithium ion batteries could be investigated by efficient simulation method [1,2]. Here, we developed an electrochemical-lumped thermal analytical model to analyze the thermal response and heat breakdown of a pouch LiNi1/3Co1/3Mn1/3O2 battery (3Ah) under fast ... En savoir plus
In solution, sodium dodecyl sulfate (SDS) (structure shown in Fig. 1) can form a boundary film on metal surfaces. Previous studies have extensively investigated the characteristics of such surfactant films experimentally [1][2][3]. A dependency of SDS surface concentration and film ... En savoir plus
Lithium-ion batteries are most preferable energy storage devices for its higher energy density, flexible form factor and lightweight design than comparable battery technologies. The present simulation work is focused on incorporating contact thermal resistance within a two-dimensional ... En savoir plus