Consultez les proceedings de la Conference COMSOL 2020
Studies of poroelastic systems increasingly utilize numerical modeling. Especially for geotechnical applications models are set up as a tool to understand phenomena in porous media that deform due to changes of the hydraulic regime, or in which the flow field is affected by changes of ... En savoir plus
A new electrochemical polishing facility will be built at CERN to process copper radiofrequency structures and this in the framework of the Future Circular Collider study. This polishing installation will be designed and assembled so that the necessary working conditions to achieve the ... En savoir plus
Using a 1-D model of polymer displacement, we analyze the exergy (maximum attainable work) balance of viscosifi ed water, e.g. with Arabic gum. The 1-D model shows the principle how such an analysis can be done. A comparison as to the displacement efficiency is made between three ... En savoir plus
For the complex 3D biocompatible metallic parts, with high level of customization, used in medical prosthesis and implants Direct Metal Laser Sintering (DMLS) and Selective Laser Melting (SLM) are the most common Additive Manufacturing technologies used nowadays. However, both ... En savoir plus
Line lightning protection devices (LLPD) nowadays are widely used for lightning protection of overhead power lines. LLPD is composed of electrodes in series embedded in silicone rubber which all together forms sequence of spark gaps. When lightning overvoltage is applied it causes ... En savoir plus
The use of Permanent Magnet Synchronous Machines (PMSM) as shaft generators is not new in marine vessels propulsion drive trains. Due to risk of fires in stator windings by internal faults, DNV GL requires the shaft generator to be electrically dead without losing propulsion. This ... En savoir plus
Arcam AB has pioneered additive manufacturing using the electron beam melting (EBM) technology which provides a cost efficient and novel way of producing titanium components for the orthopedic and aerospace industries. In the heart of the EBM technology is the electron beam – whose ... En savoir plus
Silver and gold nanoparticles are widely used in the field of surface enhanced raman spectroscopy (SERS) because of the unique plasmonic properties. Plasmons or surface plasmon resonance result from the wavelength dependent dielectric properties of noble metals like Ag, Au, Pt etc., ... En savoir plus
Solvent extraction and evaporation is a widely used unit operation in the manufacturing of micro and nano-particles. Due to the weak bond of the API to the protein, the product is highly sensitive to temperature, mechanical mixing and extraction/evaporation rate. A slow extraction ... En savoir plus
Trefoil cable formation is used where three phases are carried by three single core power cables, rather than a single three phase multicore cable. The advantage of installing three single cores in such a configuration is that it minimises the induction of eddy currents, therefore ... En savoir plus