Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Rayleigh damping
Posted 29 sept. 2013, 22:27 UTC−4 MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Structural Mechanics Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hi everyone
For a
system with a single degree of freedom (a mass-spring-damper system) the equation of
motion with viscous damping ,i want to specify the damping.i want to ask how to specify αdM and
βdK,there is only one equation c=αdM*m+βdK*k,when i know c m k,how to specify α and β?
thanks all
For a
system with a single degree of freedom (a mass-spring-damper system) the equation of
motion with viscous damping ,i want to specify the damping.i want to ask how to specify αdM and
βdK,there is only one equation c=αdM*m+βdK*k,when i know c m k,how to specify α and β?
thanks all
1 Reply Last Post 30 sept. 2013, 08:41 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi Li,
Check out the COMSOL documentation under " COMSOL Multiphysics > Structural Mechanics > Theory of Solid Mechanics” for a description of Rayleigh damping. That page shows how to specify alpha and beta if you know the relative damping at two frequencies f1 and f2. Important to check what damping characteristics are obtained at frequencies other than f1 and f2, especially those outside this frequency range. Basically, alpha dampens low frequency response and beta dampens high frequency response.
Nagi Elabbasi
Veryst Engineering
Check out the COMSOL documentation under " COMSOL Multiphysics > Structural Mechanics > Theory of Solid Mechanics” for a description of Rayleigh damping. That page shows how to specify alpha and beta if you know the relative damping at two frequencies f1 and f2. Important to check what damping characteristics are obtained at frequencies other than f1 and f2, especially those outside this frequency range. Basically, alpha dampens low frequency response and beta dampens high frequency response.
Nagi Elabbasi
Veryst Engineering