Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

error geometry

Please login with a confirmed email address before reporting spam

what is this error!?
please hepl me

Failed to evaluate variable.
- Variable: mod1.spf.T_stressx
- Geometry: 1
- Boundary: 1645 1646 1647 ... 4656
Failed to evaluate expression.
- Expression: d(((-mod1.spf.T_stressx*test(mod1.u2)-mod1.spf.T_stressy*test(mod1.v2)-mod1.spf.T_stressz*test(mod1.w2))*mod1.solid.surfScale)*(dvol),{test@10})


thanks.

1 Reply Last Post 9 avr. 2013, 14:27 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 9 avr. 2013, 14:27 UTC−4
Hi

no easy way for us to understand either ;)

Have yo checked domain 1 and the boundaries listed (use the selection view in boundary mode) and checkes where they beong (which are the BC related etc, or are they really meshed ? as you have aready hid boundary ID's you must ave quite a complex model

--
Good luck
Ivar
Hi no easy way for us to understand either ;) Have yo checked domain 1 and the boundaries listed (use the selection view in boundary mode) and checkes where they beong (which are the BC related etc, or are they really meshed ? as you have aready hid boundary ID's you must ave quite a complex model -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.