Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

phase change of solidification in additive manufacturing

Please login with a confirmed email address before reporting spam

Hello every one. I am trying to model the laser melting in the additive manyfacturing to get the correct meltpool temperature field. for this means I must have the correct phase change in the system. I used the phase change example fr ice from Comsol blog. But there is an issue. During additive manufacturing we have an on going melting the block of metal with laser and later solidification of the melt pool. I use a heat transfer wuth phase change module and set the initial phase as solid, and the second phase as liquid to model the melting, knmowing the melting point and latent heat. But how should I consider the second phase change which is the solidification of melt pool.

Sepdieh


0 Replies Last Post 14 mai 2018, 12:49 UTC−4
COMSOL Moderator

Hello Sepideh Kavousi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.