Consultez les proceedings de la Conference COMSOL 2024
We have modeled surface acoustic wave (SAW) devices composed of piezoelectric materials: aluminum nitride (AlN), lithium niobate (LiNbO3), and quartz. These materials are often used in RF filters and wireless sensors, which require temperature compensation for stability. Using our COMSOL ... En savoir plus
Design of SAW devices needs the accurate study of the scattering fields, arising from the interaction of SAW with topographic irregularities. To solve this problem FE methods very perspective, because with its help one can take into account the actual geometry of the electrodes and ... En savoir plus
A novel type of tunable surface acoustic waves (SAW) filter based on 1D phononic crystal controlled by electric is field proposed. The tunability of proposed filter varied over a wide range: 1-20%. Basic idea is electrical controlled induced periodical domains in ferroelectric film based ... En savoir plus
This contribution is dedicated to numerical analysis of SAW propagation though 2D surface phononic crystal (PnC) and FE method is nowadays one of most common tool for such calculation. The device under investigation consists of two dispersive IDT and lattice of ferromagnetic pillars ... En savoir plus
The simulation of the piezoelectric actuation of the micro-cantilever is presented. Lead Zirconate Titanate (PZT) was chosen for the device fabrication design, due to its thin film processing flexibility. Four layers compose the cantilever structures presented in this work: PZT ... En savoir plus
A COMSOL Multiphysics® model was made to design a mechanical amplifier and radiation plate for the emission of high intensity 40.5 kHz ultrasound to air by means of a Langevin type transducer usually applied in cleaning baths for example. In this work, ultrasonic irradiation is aimed at ... En savoir plus
The most commonly used type of resonator is the AT-cut, where the quartz blank is in the form of a thin plate cut at an angle to the optic axis of the crystal. This paper reports the modeling of a quartz oscillator for a resonant frequency analysis based on piezoelectric effects. The ... En savoir plus
Microfluidic devices and lab-on-a-chip (LOC) require the ability to transport or pump reagents or reaction products, the ability to effectively mix small volumes of fluid, and provide direct data display. Surface acoustic wave (SAW) driven acoustic streaming generated by a piezoelectric ... En savoir plus
Finite element analysis (FEA) is a modern tool for exploration of new horizons in science, technology and engineering. Different computer software such as ANSYS, ABACUS, PZFLEX and COMSOL Multiphysics® based on FEA are used for modeling and simulation of acoustic phenomena, for design of ... En savoir plus
In this paper we made an attempt to maximize the power output in the different piezoelectric materials in a unimorph cantilever beam configuration. In this research, a macro scale unimorph piezoelectric power generator prototypes consists of an active piezoelectric layer, stainless steel ... En savoir plus