Consultez les proceedings de la Conference COMSOL 2024
High intraocular pressure (IOP) is a risk factor for glaucoma, a condition that can cause blindness. Conventional ways of measuring IOP either require contact or can be uncomfortable for the patient. We have developed a method to measure IOP from the propagation time of a wave on the ... En savoir plus
Medical accelerators, in particular Cyclotrons, are used to accelerate charged particles to tens of Mega electron Volts (MeV) of energies. These high energy particles then used to produce isotopes for medical application such the system located at king Faisal Specialist Hospital and ... En savoir plus
High frequency ultrasound (100-1000 MHz) has been used in microscopy since the 1970s. The main imaging component, the acoustic lens, is commercially available. The resolution, working distance, and focal length depend on the structure of a lens, which is unique for each produced lens. ... En savoir plus
Heat exchanger fouling is one of the biggest problems of industry. The induced loss of efficiency leads to oversizing and over-costs. In order to eliminate the fouling layer, maintenance operations are required. This study focus on the physicochemical and hydrodynamic mechanisms ... En savoir plus
Bubbles trajectories in microchannel laminar flow can be controlled with fluidic forces. This effect finds applications in the field of electrochemical engineering. In this study, we investigate the bubble motion at moderate Reynolds number (1 En savoir plus
In the EMPIR project ADVENT the Scanning Microwave Microscopy (SMM) is investigated. The SMM is a still rather novel member of the family of scanning probe microscope. It has attracted a lot of attention recently, because this instrument can be used to characterize various electrical ... En savoir plus
In the construction sector the concrete and the steel bars represent still the key components, although they are very vulnerable by the atmospheric agents, as in the case of their degradation caused by corrosion. The study of the concrete carbonation, due to the CO2 which permeates the ... En savoir plus
Hydrocyclones are industrial devices used as processing units in fluid and particle technology. A hydrocyclone is an apparatus consisting of a cylindrical or a cylindrical-conical body with a tangential or involute entrance to admit the fluid inside. There are also two opposite exits, ... En savoir plus
Cell morphology, orientation, and fate of differentiated stem cells can be affected by mechanical stimulation. Mechanobiological studies help to understand the molecular mechanisms of cells sensing and responding to mechanical cues. Previously, we have developed a vacuum-operated ... En savoir plus
The continuous and intensive use of squirrel-cage induction motors in the modern industry, has in some cases caused a serious deterioration of the electrical insulation in the windings of the machine, generating as a consequence internal short-circuit failures, the effects on the ... En savoir plus