Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

structural mechanics

Posted 25 déc. 2015, 02:38 UTC−5 Version 5.0 1 Reply

Wanting Zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Recently, I want to study the indentation properties of composite material. When I choose the 2D plane strain analysis, I don't know how to set the parameter "thickness", becaues the composite material is not the same on every section. Can someone help me? Thanks a lot.
1 Reply Last Post 28 déc. 2015, 08:38 UTC−5
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 28 déc. 2015, 08:38 UTC−5
Dear Wanting,

If the out-of-plane thickness is not constant throughout the model then a 2D plane strain analysis may not be suitable. You need a 3D analysis.

Nagi Elabbasi
Veryst Engineering
Dear Wanting, If the out-of-plane thickness is not constant throughout the model then a 2D plane strain analysis may not be suitable. You need a 3D analysis. Nagi Elabbasi Veryst Engineering

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content