Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

heat and mass transfer

Please login with a confirmed email address before reporting spam

Good day. Iam a beginner and will like to know how to couple heat and mass transfer equations in comsol multiphysics 5.1

1 Reply Last Post 30 nov. 2015, 08:39 UTC−5
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 30 nov. 2015, 08:39 UTC−5
Hello Bobby,
You will find many tutorials with step by step instructions that illustrate how to set up a coupled analysis in COMSOL in the Application Libraries. These are found within the COMSOL graphic user itnerface under File>Application Libraries.
As you are beginning to work with the software, I would strongly that before you do anything else you work through the materials in the Introduction to COMSOL Multiphysics manual. It can be found within the COMSOL graphical user interface under File>Help>Documentation. These materials will intreoduce you to all the fundamental concepts.
Best regards,
Jeff
Hello Bobby, You will find many tutorials with step by step instructions that illustrate how to set up a coupled analysis in COMSOL in the Application Libraries. These are found within the COMSOL graphic user itnerface under File>Application Libraries. As you are beginning to work with the software, I would strongly that before you do anything else you work through the materials in the Introduction to COMSOL Multiphysics manual. It can be found within the COMSOL graphical user interface under File>Help>Documentation. These materials will intreoduce you to all the fundamental concepts. Best regards, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.