Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

thickness problem in resonance cavity simulation

Posted 1 juin 2015, 06:14 UTC−4 RF & Microwave Engineering 0 Replies

Doyu Lee
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to simulate resonance cavity to know resonance frequency and Quality factor of the cavity. I found resonance cavity model in model library. It works well. So I move to the next step. To simulate real cavity I made, I adjust thickness to the simple cylindrical cavity. resonance frequency looks still reasonable, but quality factor looks insane. May the problem come from the Impedance boundary condition. There are conduction wall, so field cannot pass through however in outer boundary of conducting wall, Impedance boundary condition applied one more time. Comsol shows really small energy losses. Or, method for calculate Qfactor was wrong.

Are there any way to simulate resonance cavity which have thickness?
Or other way to solve my problem?
Help me please.. I stuck in this problem longer than 1 month...

here is link of my test file
drive.google.com/open?id=0BwLABZZtNrpsTnpFcmEwUVZrc3M&authuser=0
0 Replies Last Post 1 juin 2015, 06:14 UTC−4
COMSOL Moderator

Hello Doyu Lee

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content