Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Using variable previously computed for next simulation
Posted 27 juil. 2010, 12:28 UTC−4 1 Reply
Please login with a confirmed email address before reporting spam
I am having several difficulties trying to solve a multiphysics problem in the time domain. I have a Heat transfer model coupled with Mechanical and acoustic. At the beginnings I solve the Heat equation and then use the solution for the other two equations, but I get the error" Failed to find consistent initial values". Usually I manage to solve this kind of problem solving the static equations and using the result as initial condition. Unfortunately, in this new simulation, i wanna use the temperature solution of Thermal model found in the previous step and so I don't manage to use the static solution as initial condition. How can I solve this problem? Many thanks
Best regards
Luca Belsito
Best regards
Luca Belsito
1 Reply Last Post 28 juil. 2010, 04:10 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
if you use the segregated solver, does this not solve the issue ? or by plying with the store solution use initial conditions from stored ?
--
Good luck
Ivar
if you use the segregated solver, does this not solve the issue ? or by plying with the store solution use initial conditions from stored ?
--
Good luck
Ivar