Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Meaning of Inlet Boundary Condition during 2D modelling
Posted 25 nov. 2014, 17:16 UTC−5 Computational Fluid Dynamics (CFD), Modeling Tools & Definitions, Parameters, Variables, & Functions Version 5.0 1 Reply
Please login with a confirmed email address before reporting spam
The inlet boundary condition makes sense in 3D modelling. But for 2D modelling. the model is really just a slice of the 3D model, so units should not be "kg/s" but rather "kg/s/m" for mass flow. So I do not understand why the Inlet boundary condition has marked kg/s for the normal mass flow rate.
Is this an oversight, or is this implied somewhere?
1 Reply Last Post 26 nov. 2014, 04:15 UTC−5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
It is assumed that the 'slice' studied has a depth of one length unit.
All inputs behave like this. As an example, a volume force is given in N/m^3 also in 2D.
Regards,
Henrik
It is assumed that the 'slice' studied has a depth of one length unit.
All inputs behave like this. As an example, a volume force is given in N/m^3 also in 2D.
Regards,
Henrik