Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to create a meshing effect like this
Posted 29 sept. 2014, 01:35 UTC−4 Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Hi guys,
I'm doing a 2D-Axisymmetric model, and I'm attempting to achieve a mesh which looks like this. The dark lines in the center are membrane boundaries.
1. I've tried to create multiple layers. One layer would be for rectangles, one for the free triangles. However, this only allows me to create a layer from the side, and not from the top.
Could I get some suggestions on how I can achieve this structure? Thanks in advance!
I'm doing a 2D-Axisymmetric model, and I'm attempting to achieve a mesh which looks like this. The dark lines in the center are membrane boundaries.
1. I've tried to create multiple layers. One layer would be for rectangles, one for the free triangles. However, this only allows me to create a layer from the side, and not from the top.
Could I get some suggestions on how I can achieve this structure? Thanks in advance!
Attachments:
1 Reply Last Post 29 sept. 2014, 21:43 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
you have to use the virtual operations in geometry.
Mesh control domain or edges.. play with it, it is quite straightforward.
Then in the mesh settings you can control the sizes of those virtual set control geometries.
Probably you need some control domain to set the rectangular mesh in a general tetrahedral one.
good luck..
you have to use the virtual operations in geometry.
Mesh control domain or edges.. play with it, it is quite straightforward.
Then in the mesh settings you can control the sizes of those virtual set control geometries.
Probably you need some control domain to set the rectangular mesh in a general tetrahedral one.
good luck..