Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
2D-axis symmetry, 3D no symmetry not possible to calculate due to limited fixed points
Posted 17 sept. 2014, 02:38 UTC−4 Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers, Structural Mechanics Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I have a situation were I need to simulate a kind of tube with a pressure inside, the target is to calculate the displacement of the tube due to the pressure. Reinforcements are needed and these will be evaluated.
In the case of a round tube we can work with a 2D-axis symmetry study and put a boundary load on the inside of the tube and use 1 roller on the bottom, this is calculating fast and accurate.
Now I want to this in 3D (because my final tube is a none axis-symmetric shape (round rectangular)).
But in the 3D version I can not work without a fixed constraint or with too many rollers.
In fact this is the same just that the 3D version is not thinking that the applied force is completely symmetric.
I tried with splitting the rectangular tube in 2 and work with a symmetry but that did not work out neither.
Any suggestions on how to deal with this kind of problems?
Kind regards
Hans
Hello Hans Parmentier
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.