Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Failed to evaluate variable Jacobian
Posted 4 août 2014, 16:20 UTC−4 Battery Design Version 4.4 2 Replies
Please login with a confirmed email address before reporting spam
Hi,
I'm trying to implement Lithium-ion battery 2D tutorial on a 3D structure. I followed all steps but COMSOL gives me this error:
Failed to evaluate variable Jacobian.
- Variable: comp1.liion.cs_surface
- Geometry: 1
- Domain: 6
Domain 6 is the separator between anode and cathode. Its thickness is 0.1mm.
I can't figure out what this error is about. I appreciate any advice.
Best,
Mohad
I'm trying to implement Lithium-ion battery 2D tutorial on a 3D structure. I followed all steps but COMSOL gives me this error:
Failed to evaluate variable Jacobian.
- Variable: comp1.liion.cs_surface
- Geometry: 1
- Domain: 6
Domain 6 is the separator between anode and cathode. Its thickness is 0.1mm.
I can't figure out what this error is about. I appreciate any advice.
Best,
Mohad
2 Replies Last Post 12 janv. 2015, 12:53 UTC−5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Also, please find my model attached.
Best Regards,
Mohad
Best Regards,
Mohad
Attachments:
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Under Porous Electrode 2 > Porous Electrode Reaction 1 > Model Inputs > Concentration, and you have set c to "User defined" with c=0.
You should set c to "Insertion particle concentration, surface (liion)"
-DW
You should set c to "Insertion particle concentration, surface (liion)"
-DW