Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Measure the vibrations on the walls of a tank

Posted 25 mai 2014, 15:12 UTC−4 Acoustics & Vibrations Version 4.3a 1 Reply

Dinesh Pamerla
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi
I am trying to build a cylinder with thickness 1.25mm and send an sinusoidal wave to it and plot the frequency response on the wall of the cylinder to the original frequency response. Kindly help me out with this and I am absolute beginner of COMSOL. So i am trying it difficult to build the cylinder with thickness and send some waves. Hope to hear from you.
1 Reply Last Post 26 mai 2014, 06:58 UTC−4
Pieter Westerik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26 mai 2014, 06:58 UTC−4
So have you managed to build the cylinder? Then you can add a forced displacement boundary at one end of the cylinder.
So have you managed to build the cylinder? Then you can add a forced displacement boundary at one end of the cylinder.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content