Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
out-of-plane joule heating model (3D)
Posted 9 avr. 2014, 08:28 UTC−4 Electromagnetic Heating, Heat Transfer & Phase Change Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I've found in "Joule Heating (3D)" model a parameter called "out-of-plane", but I don't understand how it works. The documentation explains about the 2D models or convective/radiation nodes, but nothing about the 3D models. The default value is 1 meter (!!!).
PS: my geometry consists of a thin membrane (1mm x 1mm) of three layers: 200nm (heat transfer in solids model) + 180nm (joule heating model) + 200nm (heat transfer in solids model).
Thank for the help
Hello Paolo Picciafoco
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.