Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Effect of magnetic field on vibrating cantilever beam
Posted 4 déc. 2013, 03:18 UTC−5 Low-Frequency Electromagnetics, Studies & Solvers, Structural Mechanics Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
I'm a new user and I am currently facing a problem on simulating the effect of magnetic field on vibrating cantilever beam.
My model will include placing one permanent magnet on each side of the beam and placed above them is another permanent magnet that does not touch it but provides a repulsive force when it comes near. What I intend to simulate is the response of the beam under vibration and influence of the surrounding magnetic field.
I have read up on the tutorial of ACDC permanent magnet and damping effect of magnetic field on vibrating conducting solids but still could not do it.
Any advice/help on how to set the ACDC magnetic field settings/ magnetic flux conservation, etc?
Thank you for your time and any kind of help will be greatly appreciated.
Hello Shiwei Ng
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.