Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Electric Point Dipole Asymmetry?!

Posted 19 nov. 2013, 21:25 UTC−5 RF & Microwave Engineering, Mesh Version 4.3a 0 Replies

Daniel Wintz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have a simple model, with a point dipole surrounded by air, and then a PML. I want to recover the fields of a point dipole and I ALMOST do. They're totally fine but SLIGHTLY asymmetric--it looks like more power is emitted down and left. It's ever so slightly off axis.

It's gotta be the mesh or reflections from the PML...but still...even if those are incorrect shouldn't they be incorrect in a symmetric way?! This makes me think it's the mesh since the mesh isn't necessarily symmetric even though it almost always is.

Model uploaded and Study 1 is ready to solve. Looking at the plot of Ex you'll see it's slightly off axis.

Help is greatly appreciated! Thanks!

Daniel

Attachments:

0 Replies Last Post 19 nov. 2013, 21:25 UTC−5
COMSOL Moderator

Hello Daniel Wintz

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content