Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to set boundaries as continuity ?
Posted 1 mai 2013, 03:10 UTC−4 2 Replies
Please login with a confirmed email address before reporting spam
I want set the boundary as a continuity but I don't know how?
I know that in Comsol by default the boundaries are define as continuity and it follow this equation: n.j=0
but I want change it to n(j1- j2)=0 (i want the boundary between two domain will be as continuity like n(j1-j2)=0)
how I can do this?
Any help would be appreciated.
I know that in Comsol by default the boundaries are define as continuity and it follow this equation: n.j=0
but I want change it to n(j1- j2)=0 (i want the boundary between two domain will be as continuity like n(j1-j2)=0)
how I can do this?
Any help would be appreciated.
2 Replies Last Post 4 mai 2013, 07:02 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
use the geometry assembly mode to define your own contact or continuity equation on common adjacent domain boundaries (that have not been previously grouped by an explicit Union node) check the doc
--
Good luck
Ivar
use the geometry assembly mode to define your own contact or continuity equation on common adjacent domain boundaries (that have not been previously grouped by an explicit Union node) check the doc
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Thanks dear Ivar for your reply
Hadi
Hadi