Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
gas mixture
Posted 30 avr. 2013, 16:50 UTC−4 Computational Fluid Dynamics (CFD), Modeling Tools & Definitions, Parameters, Variables, & Functions 1 Reply
Please login with a confirmed email address before reporting spam
I am trying to model an ejector with 2 inlets and one outlet. In the first inlet I have hydrogen with low pressure, in the second inlet I have (hydrogen 30% + steam 70%) with a higher pressure. The material from the second inlet is sucked to the ejector due to pressure gradient. There is no chemical reaction. Two inlets just mix together.
The outlet will be (hydrogen + steam), however I don't know the mass fraction of the species.
The flow is turbulence.
I don't know how to define the compositions of the second inlet as well as the outlet. should I use multiphase flow or...?
I almost tried every thing. I appreciate your help.
Elham
Hello Elham Hosseinzadeh
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
The problem can be solved by using two physics together:
1- Fluid Flow (single phase, turbulent) 2- Chemical Engineering (Transport of concentrated species)
First, you have to simulate the flow. Then use the solution (flow velocities) as the input for solving the species transport.
/Babak