Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Save soltution at stop condition

Posted 15 mars 2013, 00:06 UTC−4 Version 4.3a 1 Reply

Miroslav Kolar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi!
How can I force COMSOL to save the solution for the time instant when the stop condition is satisfied?
Thank you,
Miroslav
1 Reply Last Post 15 mars 2013, 01:29 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 15 mars 2013, 01:29 UTC−4
Hi

you means save to file and exit, or save the results, I understood it did the latter. Check the batch and extra solver nodes for runand close, I believe there is something, but that I havent tried, usually for long runs, I leave it over night and find my results for the coffee (except when MS has decidedd to update and reboot, then I loose my work if the "recovery" has not worked

--
Good luck
Ivar
Hi you means save to file and exit, or save the results, I understood it did the latter. Check the batch and extra solver nodes for runand close, I believe there is something, but that I havent tried, usually for long runs, I leave it over night and find my results for the coffee (except when MS has decidedd to update and reboot, then I loose my work if the "recovery" has not worked -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content