Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Error Jacobi with user-defined function
Posted 23 févr. 2013, 17:53 UTC−5 RF & Microwave Engineering, Materials, Parameters, Variables, & Functions, Studies & Solvers Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
I defined a function in Global Definition to describe the graded-index. However, when I used the Solve-Modal Analysis, the COMSOL popped a window to warn error in Jacobi matrix.
Plus, I suppose my function was working well, I am not sure whether it can be a assignment in Material dialog.
If I replace my function with a constant in index value setting, the model works well.
Thank you.
Plus, I suppose my function was working well, I am not sure whether it can be a assignment in Material dialog.
If I replace my function with a constant in index value setting, the model works well.
Thank you.
1 Reply Last Post 25 févr. 2013, 13:55 UTC−5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
it could well be that it should rather be defined in the Mode - Definitions rather than Global definitions, particularly if it contains references to the geometry.
Then why add it to the material ? if it's a definition of the index, OK perhaps you should define it in the material section
--
Good luck
Ivar
it could well be that it should rather be defined in the Mode - Definitions rather than Global definitions, particularly if it contains references to the geometry.
Then why add it to the material ? if it's a definition of the index, OK perhaps you should define it in the material section
--
Good luck
Ivar