Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
thermophoresis effect on particles suspended in air flowing through microchannel
Posted 4 févr. 2013, 11:48 UTC−5 MEMS & Nanotechnology, Heat Transfer & Phase Change, MEMS & Piezoelectric Devices, Microfluidics Version 4.3a 0 Replies
Please login with a confirmed email address before reporting spam
Here, I am using thermophoresis model file for reference in which hydrogen fluid flowing through pipe and particles deflect from their paths dur to heated wall.
but, I want to verify thermophoresis effect on fine particles (<=2.5 um) in air fluid flowing through 200 um microfluidic channel... i used gravity, drag, brownian and most importantly thermophoretic force to trace path of the particles.
although i have checked for various parameter changes( ex. temp, fluid flow rate, particle density ), I couldn't be able to change particles tracing paths which is same in all the simulations.
so, can anybody help?
Hello Tushar Patel
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.