Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Surface tension effects on a free boundary

Posted 21 nov. 2012, 19:48 UTC−5 Fluid & Heat, Computational Fluid Dynamics (CFD) Version 4.3a 4 Replies

Shawn.F
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear all,

In COMSOL website, there is a model for "Square Droplet Oscillations under Surface Tension". In this model, instead of two phase flow modeling, ALE and single phase flow have been combined, and the effects of surface tension has been introduced in a weak form. the model has been developed in COMSOL3.5 in 2D axi-symmetric.

The surface tension effects are introduced over the free surfaces of the droplet for "u" and "v" components of the velocity in weak form as:

for "u" (r direction) => -(surface_tension)*(r*test(uTr)+test(u))
for "v" (z direction) => -(surface_tension)*r*test(vTz)

Now, I would like to do the same thing in COMSOL4.3, But the problem is that I have no idea how to define directional weak forms. When I add a boundary weak contribution it asks for just one expression regardless of any direction, and unfortunately I am not expert in weak form equations.

Could anyone give me any hint about this, it would be highly appreciated.

Regards,

Shawn
4 Replies Last Post 27 nov. 2012, 12:15 UTC−5
Daniel Smith COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26 nov. 2012, 10:10 UTC−5
The Microfluidics Module contains a ready made interface which uses the ALE method to model two-phase flows. Free surfaces can exist on interior or exterior boundaries. I recommend you use the Microfluidics Module to solve the type of problem you describe:

www.comsol.com/products/microfluidics/
The Microfluidics Module contains a ready made interface which uses the ALE method to model two-phase flows. Free surfaces can exist on interior or exterior boundaries. I recommend you use the Microfluidics Module to solve the type of problem you describe: http://www.comsol.com/products/microfluidics/
Shawn.F
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26 nov. 2012, 14:15 UTC−5

Daniel, thank you for the hint.

But, I cannot find microluidics module in my COMSOL Do I have to purchase an extra license for that module? Or It should be implemented indirectly?
--
Shawn
Daniel, thank you for the hint. But, I cannot find microluidics module in my COMSOL Do I have to purchase an extra license for that module? Or It should be implemented indirectly? -- Shawn
Daniel Smith COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26 nov. 2012, 17:00 UTC−5
Hi Shawn, you will need to purchase the Microfluidics module for your license. Implementation of the boundary condition yourself would be practically impossible so I would recommend you add the Microfluidics module to your license. There are some example models which use this interface here:

www.comsol.com/showroom/documentation/model/4650/

Please be aware that the Two-Phase Flow, Moving Mesh interface cannot handle topological changes in the fluid.
Hi Shawn, you will need to purchase the Microfluidics module for your license. Implementation of the boundary condition yourself would be practically impossible so I would recommend you add the Microfluidics module to your license. There are some example models which use this interface here: http://www.comsol.com/showroom/documentation/model/4650/ Please be aware that the Two-Phase Flow, Moving Mesh interface cannot handle topological changes in the fluid.
Shawn.F
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 27 nov. 2012, 12:15 UTC−5
Daniel,

Thank you very much. I will go for this module.

Regards,

Shawn
Daniel, Thank you very much. I will go for this module. Regards, Shawn

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content