Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Magnetic force calculations
Posted 2 août 2023, 04:41 UTC−4 Electromagnetics, Mesh 1 Reply
Please login with a confirmed email address before reporting spam
Hi All,
I hope someone will have insight into the following issue I encountered: I'm modeling a system using the magnetic fields in the AC/DC module and would like to calculate the magnetic force on metal components in a field of an electromagnet.
It seems that the result is very dependent on the mesh definition (varying from 5N to 155N depending on the mesh made) so I was wondering what is the proper way to set up the mesh and check if it is appropriate?
I would appreciate any thoughts on the issue :) thanks!
Please login with a confirmed email address before reporting spam
Hi Ivana,
magnetic force calculation is notoriously mesh dependent. Make sure you have a dense mesh where magnetic field gradients are high, like edges, corners, narrow airgaps and the like. Verify mesh convergence by parameterizing the mesh size settings.
Cheers Edgar
-------------------Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com