Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Particle Tracing (the stored trajectories have the wrong dimension)
Posted 9 oct. 2012, 20:29 UTC−4 Charged Particle Tracing, Fluid & Heat, Particle Tracing for Fluid Flow, Results & Visualization Version 4.3 2 Replies
Please login with a confirmed email address before reporting spam
The model calculate fluid velocities in the 2D geometry.
I added the 'Particle Tracing for fluid flow' physics to the 2D geometry but after the solution is computed I get a error message:
the stored trajectories have the wrong dimension
-Dimension: 3
-Plot: traj1 (Particle trajectories).
To be able to visualize the trajectories, I have to create a 3D Plot Group
The trajectories are plotted in 3D with the z-direction being time.
I would like to visualize the trajectories in my 2D geometry. (It works if I remove the 3D geometry but I need it to get a correct simulation of the fluid velocity).
Does anybody know how I could do that?
Thanks
Hello Sophie Loire
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
I have the same problem in particle trajectory in 2D/3D model. Have you solve this problem?
Thanks.
Please login with a confirmed email address before reporting spam