Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Unable to view material properties
Posted 2 oct. 2012, 10:08 UTC−4 Materials Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
Dear Sir,
I am unable to view the properties of certain materials. Ex silicone.
When i run the simulation using silicone it works perfectly indicating that the material has inbuilt properties but since i am unable to view them i cannot ascertain if the material properties are correct. It would be of great help if you can tell me how I can view the values.
Thanking you in advance,
Vijay.
I am unable to view the properties of certain materials. Ex silicone.
When i run the simulation using silicone it works perfectly indicating that the material has inbuilt properties but since i am unable to view them i cannot ascertain if the material properties are correct. It would be of great help if you can tell me how I can view the values.
Thanking you in advance,
Vijay.
1 Reply Last Post 2 oct. 2012, 14:45 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
normally you have a plot function for the "functional" material parameters, but you need to go to the "function definition" of the material "sub node". Note that the units do not appear in the graphs so you need to go back to the main material node to check the units there
--
Good luck
Ivar
normally you have a plot function for the "functional" material parameters, but you need to go to the "function definition" of the material "sub node". Note that the units do not appear in the graphs so you need to go back to the main material node to check the units there
--
Good luck
Ivar