Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Plotting streamlines at a certain distance from an edge
Posted 1 oct. 2012, 12:45 UTC−4 Fluid & Heat Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I'm modeling a flow with Re<<1. It's a 2D flow over a cylindrical post with the axis of the cylinder perpendicular to the flow. I want to plot streamlines at a certain distance from the top and bottom edges of the cylinder. Can someone guide me through the process?
Thanks in advance,
Spandana
I'm modeling a flow with Re<<1. It's a 2D flow over a cylindrical post with the axis of the cylinder perpendicular to the flow. I want to plot streamlines at a certain distance from the top and bottom edges of the cylinder. Can someone guide me through the process?
Thanks in advance,
Spandana
1 Reply Last Post 1 oct. 2012, 16:26 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi Spandana,
When computing streamlines you can choose to specify initial coordinates of the streamline(s). That location can be anywhere inside the model and not necessarily at the start or finish. In the Streamline Positioning input specify “Start Point Controlled” and in the Entry Method specify “Coordinates”.
Nagi Elabbasi
Veryst Engineering
When computing streamlines you can choose to specify initial coordinates of the streamline(s). That location can be anywhere inside the model and not necessarily at the start or finish. In the Streamline Positioning input specify “Start Point Controlled” and in the Entry Method specify “Coordinates”.
Nagi Elabbasi
Veryst Engineering