Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Number of Elements Along a Diameter

Posted 6 sept. 2012, 10:04 UTC−4 Mesh Version 4.2a 1 Reply

Melanie Pigeon
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

When reporting mesh details within the CFD community, it seems to be a standard to report the number of elements along a diameter when workings with a geometry of circular cross-section. Is there any automated way of calculating the average count for a geomtry within the comsol software? Or do I simply need to put a ruler on the screen and count them out myself?
1 Reply Last Post 6 sept. 2012, 11:50 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 sept. 2012, 11:50 UTC−4
Hi

the mesh statistics page allows you to select any entitiy and get info about each, or all ...

--
Good luck
Ivar
Hi the mesh statistics page allows you to select any entitiy and get info about each, or all ... -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content