Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Boundary layer for thin coating
Posted 11 août 2022, 09:01 UTC−4 Materials, Mesh Version 5.6 0 Replies
Please login with a confirmed email address before reporting spam
Hello all,
I'm currently modelling a glass-guide with a thin copper-coating on the inside with a thickness of around 500nm. On the outside, a coil is placed. Using the magnetic field interface and a frequency study I want to examine the skin-effect inside the guide. To model the coating I used a boundary mesh. I'm aware that at this thickness the skin-effect should be negligible. However, to test it I made a thick coating (1mm) and the magnetic field wasn't affected at all. I explicitly applied copper to the boundary but it appears that it doesn't do anything.
I'm fairly new to COMSOL, so I might have made a silly beginners-error. I hope that someone is able to help me.
Best, Luca
Hello Luca
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.