Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Please Help, Eigen frequency of Fluid filled micropipette

Posted 30 juil. 2012, 20:28 UTC−4 Structural Mechanics Version 4.1 3 Replies

Sankha Mukherjee
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everyone,

I am trying to simulate the natural frequencies of a micropipette when it's filled with liquids. So far, I have used Fluid structure interaction physics plus solid mechanics physics to do the analysis. However, when I run the simulation I get weird shapes and error messages. The results show that the natural frequency of the fluid filled piepete is the same as the eigen frequency of the pipette without fluid. But this does not make sense, because resonance frequency should decrease when fluid is introduced because of the added mass of the fluid. Can anyone tell me as to what simulation steps should be used? What conditions should be used? Can anyone share a model (as a benchmark model) to show how these types analysis need to be done? I browsed through the blog, but, there seems to be no model to touch upon this topic.

-Sankha

3 Replies Last Post 2 août 2012, 14:39 UTC−4
Sankha Mukherjee
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 1 août 2012, 20:47 UTC−4
Hello Everyone,

I am attching my model herewith. Please have a look and provide your suggestions.

Thanks

Sankha
Hello Everyone, I am attching my model herewith. Please have a look and provide your suggestions. Thanks Sankha
Sankha Mukherjee
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2 août 2012, 13:00 UTC−4
Sorry, I forgot to attach the model. Attaching it herewith.



-Sankha
Sorry, I forgot to attach the model. Attaching it herewith. -Sankha

Attachments:

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2 août 2012, 14:39 UTC−4
Hi

obviously you have not managed to couple the physics correctly. In the later version 4 you can add a "boundary mass" to mimic the extra mass of the liquid, but you might need the acoustic module to get the complete coupling running, pre-cooked by COMSOL

--
Good luck
Ivar
Hi obviously you have not managed to couple the physics correctly. In the later version 4 you can add a "boundary mass" to mimic the extra mass of the liquid, but you might need the acoustic module to get the complete coupling running, pre-cooked by COMSOL -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content