Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
two-phase flow under large wetting angle (phase field method)
Posted 9 déc. 2021, 08:54 UTC−5 Computational Fluid Dynamics (CFD) Version 5.6 0 Replies
Please login with a confirmed email address before reporting spam
I am a new learner for COMSOL software. I want to simulate oil-water flow through phase field method. Initially, the porous media is saturated with oil (fluid 2). So, the contact angle represents the oil contact angle. I found that the smaller the oil contact angle is, the longer the computation time is. Whether this is the normal phenomenon ? In addition, when the oil contact angle is set to be 120, the residual oil in the dead ends will disappear suddenly (See figures in appendix ), how can I solve this problem? Can someone help me with my problem please? Thanks
Attachments:
Hello Yin Chen
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.