Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Dye sensitized solar cell (DSSC) simulation

Posted 25 juin 2012, 07:09 UTC−4 RF & Microwave Engineering, Geometry, Mesh 6 Replies

Juan Jesus Gallardo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to simulate the electrical behavior of a DSSC.

This kind of solar cell is made in a sandwich like structure.

First of all, there is a FTO glass like electrode. On this glass it is deposed a TiO2 layer, a dye layer is adsoberd on the TiO2, a liquid electrolyte is in contact with these two layers, and at the end a counter electrode close the system. The counter electrode is a platinized FTO glass.

I would like someone tell me how to start the model and how to register the electrical parameters (voltage and current).
What model do I have to use?

Thank you.
6 Replies Last Post 1 juin 2015, 02:11 UTC−4
Jürgen Schumacher
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 23 juil. 2012, 04:18 UTC−4
Hi,

our group at ICP has been developing a DSC model. You can find a model description at www.pecsim.ch.

Greetings,
Juergen



I want to simulate the electrical behavior of a DSSC.

This kind of solar cell is made in a sandwich like structure.

First of all, there is a FTO glass like electrode. On this glass it is deposed a TiO2 layer, a dye layer is adsoberd on the TiO2, a liquid electrolyte is in contact with these two layers, and at the end a counter electrode close the system. The counter electrode is a platinized FTO glass.

I would like someone tell me how to start the model and how to register the electrical parameters (voltage and current).
What model do I have to use?

Thank you.


Hi, our group at ICP has been developing a DSC model. You can find a model description at www.pecsim.ch. Greetings, Juergen [QUOTE] I want to simulate the electrical behavior of a DSSC. This kind of solar cell is made in a sandwich like structure. First of all, there is a FTO glass like electrode. On this glass it is deposed a TiO2 layer, a dye layer is adsoberd on the TiO2, a liquid electrolyte is in contact with these two layers, and at the end a counter electrode close the system. The counter electrode is a platinized FTO glass. I would like someone tell me how to start the model and how to register the electrical parameters (voltage and current). What model do I have to use? Thank you. [/QUOTE]
Mohana Priya
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 10 févr. 2014, 01:41 UTC−5
I am trying to model DSSC. there is a comsol paper describing the optical and electrical model. I am facing trouble in meshing the nano-meter sized layer where the glass and other layers are of mm range.
I am trying to model DSSC. there is a comsol paper describing the optical and electrical model. I am facing trouble in meshing the nano-meter sized layer where the glass and other layers are of mm range.
Juan Jesus Gallardo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 10 févr. 2014, 02:54 UTC−5
Hi.

Could you tell me the reference of the comsol paper?

Thanks a lot.
Hi. Could you tell me the reference of the comsol paper? Thanks a lot.
Mohana Priya
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 10 févr. 2014, 03:31 UTC−5
www.comsol.com/paper/optical-and-electrical-modeling-of-three-dimensional-dye-sensitized-solar-cells-14982

if u have trouble in downloading the paper, pls tell me. i ll mail you.
http://www.comsol.com/paper/optical-and-electrical-modeling-of-three-dimensional-dye-sensitized-solar-cells-14982 if u have trouble in downloading the paper, pls tell me. i ll mail you.
Juan Jesus Gallardo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 10 févr. 2014, 04:00 UTC−5
Hi, again Mohana.

I have problems to download it. Please, email me the paper if it is possible.

My email is jj.gallardo@uca.es

Thanks a lot.

Regards.
Hi, again Mohana. I have problems to download it. Please, email me the paper if it is possible. My email is jj.gallardo@uca.es Thanks a lot. Regards.
Dileep V Raj
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 1 juin 2015, 02:11 UTC−4
Would like to get the paper. Please mail me at dileepvraj@gmail.com
Would like to get the paper. Please mail me at dileepvraj@gmail.com

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content