Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
The Silver-Back Reflector Results Defy Common Sense
Posted 25 août 2021, 09:32 UTC−4 Wave Optics Version 5.6 0 Replies
Please login with a confirmed email address before reporting spam
According to the general understanding, if the 0.5 micron Ag is covered with a 5 micron thick aluminum oxide film, the film should be like a mirror, reflecting at least 90% of the sunlight (I calculated the reflectivity of 0.3 to 4 microns), but my calculation obviously does not meet my understanding.One is the result that I calculate with transfer matrix, the other is Comsol, two results are very cotton thread is different.!!I added ports on the top of aluminum oxide and the bottom of silver. PML boundary conditions and periodic boundary conditions were used!Please help me to check where the setting is wrong, thank you! Have a nice day!
Attachments:
Hello Li Guo
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.