Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
COMSOL solves the model but keeps showing empty plots
Posted 14 août 2021, 07:37 UTC−4 Computational Fluid Dynamics (CFD), Heat Transfer, Microfluidics Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
COMSOL solves a three-dimensional non-isothermal flow model based on internal flow over a random surface. However, it does not show the results after solving, even if I manually add a 3D plot group. Additionally, when I try to calculate derived values like surface or volume average those are calculated, which assures me that the solution has been calculated. I have tried saving the file and re-opening on a different computer but still encounter the same error. I have also tried changing the rendering preference to software but that too failed.
If anyone has any advice, it will be most helpful.
Please login with a confirmed email address before reporting spam
I suggest you post your model to the forum.
-------------------Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara