Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Impossible to Couple Lubricant Shell with Solid Mechanics

Posted 21 févr. 2012, 01:07 UTC−5 Fluid & Heat, Modeling Tools & Definitions, Parameters, Variables, & Functions 2 Replies

Francesc-Xavier Borras
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Lubrication Shell: Thin film between the solid wall and the channel base.

The edge you select is the "solid wall" and if that edge is from a "solid mechanic" domain then you can couple it with the "lubrication shell" (Solid Wall Defromation)

However, the software does not ask you for any adge to define the "Channel Base", how does it know the propieties of the "Channel Base"? How to define the "Channel Base"?

Thanks again.
2 Replies Last Post 21 févr. 2012, 05:43 UTC−5
Francesc-Xavier Borras
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21 févr. 2012, 02:51 UTC−5
I attach a simplified model in 2D.

Here I tried to model both parts (pad and runner).

I assigned the Lubricant Shell Physics to both edges

In the Lubricant Shell/Gap Proprieties: I coupled the "displacement of the solid wall" with the "Solid Mechanics". I would like to couple the "displacement of the channel base" too. Why I do not have this possibility?

The software do not know which is the channel base?

Check it please.
I attach a simplified model in 2D. Here I tried to model both parts (pad and runner). I assigned the Lubricant Shell Physics to both edges In the Lubricant Shell/Gap Proprieties: I coupled the "displacement of the solid wall" with the "Solid Mechanics". I would like to couple the "displacement of the channel base" too. Why I do not have this possibility? The software do not know which is the channel base? Check it please.
Francesc-Xavier Borras
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21 févr. 2012, 05:43 UTC−5
Anyone knows who did the tutorial from "Tilted Pad Thrust Bearing". Model ID: 7077

www.comsol.com/showroom/gallery/7707/

I would be really glad to conctact him.

Thanks,
Anyone knows who did the tutorial from "Tilted Pad Thrust Bearing". Model ID: 7077 http://www.comsol.com/showroom/gallery/7707/ I would be really glad to conctact him. Thanks,

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content