Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
PDE General Form convergence
Posted 23 nov. 2011, 10:28 UTC−5 Computational Fluid Dynamics (CFD), Mesh, Parameters, Variables, & Functions, Studies & Solvers Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
I'm working on a model that has some resembles with the Comsol's shock_tube sample. As I'm fairly new in Comsol I started my study by trying to understand the sample mentioned. In this study I've encountered convergence problems when using larger amplitudes in the step function used to simulate a discontinuity front (which will be a boundary condition).
Do you guys have any experience based technique to overcome this convergence issues, or any advice for that matter??
When using my model (which uses a different EoS from the sample), the convergence problem arise when trying to simulate my complete domain in the y axis. My ideia was to solve a series of PDE's where the initial values and mesh were the ones obtain from the solution of the previous PDE at maximum y. Is this a feasible solution. If so, how can I accomplish it?? Examples or manuals would be very appreciated.
Thanks for your attention.
Hello Pedro Santos
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.