Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Failed to find consistent initial values.

Posted 10 nov. 2011, 17:05 UTC−5 Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.1 2 Replies

Yang Wei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I was doing a simulation about coupling two physics together by using the moving mesh. What I did is to run the solid mechanics first and stored the results. The laminar flow was then run by using the output from solid mechanics as the input. However, the solid mechanics part was fine but once I did laminar flow a error window was popped up.

=========================================
Failed to find consistent initial values.
Singular matrix.

There are 113 void equations (empty rows in matrix) for the variable Pump.p
at coordinates: (0.0145358,-0.0073668,0.001425), (0.0137255,-0.00590277,0.001425), (0.0124142,-0.0068996,0.001125), (0.0122855,-0.00665798,0.001125), (0.0122064,-0.00664936,0.001425), ...

There are 1074 degrees of freedom that do not occur in any equation (empty columns in matrix) for the variable Pump.p
at coordinates: (0.0145358,-0.0073668,0.001425), (0.0137255,-0.00590277,0.001425), (0.0124142,-0.0068996,0.001125), (0.0122855,-0.00665798,0.001125), (0.0122064,-0.00664936,0.001425), ...
Last time step is not converged.

=========================================

There was no errors relative to the moving mesh part so I supposed this part was okay. The problem might be the coupling between two physics.....


Anyone knows what happened?


Many thank for the help.



2 Replies Last Post 12 nov. 2011, 05:19 UTC−5
Yang Wei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 11 nov. 2011, 06:17 UTC−5
Any help?? ^_^
Any help?? ^_^
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 12 nov. 2011, 05:19 UTC−5
Hi

for me void equations rows are linked to incmplete BC definitions, there is not enough boundary conditions to give a unique solution, perhapsyou need to fix teabsolute pressure somewhere with a p=0 condition, i.e. on a point

PS I have not gone trough the full tread, its my first thoughts from your last input

--
Good luck
Ivar
Hi for me void equations rows are linked to incmplete BC definitions, there is not enough boundary conditions to give a unique solution, perhapsyou need to fix teabsolute pressure somewhere with a p=0 condition, i.e. on a point PS I have not gone trough the full tread, its my first thoughts from your last input -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content