Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

setting up initial conditions

Posted 3 nov. 2011, 22:43 UTC−4 Heat Transfer & Phase Change, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 3.5a 1 Reply

Zhang Kaiyin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to solve a heat diffusion problem.

The model consists of two subdomains. one of them is heat source. The initial temperature distrubtion in the heat source domain is obtained from a solution of one equation.

please tell me how to set up such initial conditions in Comsol Script, if you know.

Thanks

1 Reply Last Post 4 nov. 2011, 03:36 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 4 nov. 2011, 03:36 UTC−4
Hi

why use script, cant you just enter the equation directly into the T field ?

--
Good luck
Ivar
Hi why use script, cant you just enter the equation directly into the T field ? -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content