Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Exact calculation of electrical current from current density

Posted 10 mai 2019, 06:49 UTC−4 Electromagnetics, Low-Frequency Electromagnetics Version 5.4 4 Replies

Lyes Ifrek
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everybody,

I am using comsol to model a bipolar probe with three surfaces : Conductive surface forced to 0V, conductive surface forced to 10V and insulation surface beetween the two conductive surfaces. The probe is put on sea water.

So when i resolve my system I have streamlines between the two condictive surfaces.

Now, I want to calculate the current on each conductive surface from the current density integration. I use the following expression ( ec.Jxnx+ec.Jyny+ec.Jz*nz ).

I have a difference between the current IN and the current OUT about 1%. So I change the mesh to have a more accurate result but I realized that the current is totaly different comparing to the first mesh. So for one kind of mesh I have different current values.

Someone can help me if he have any idea.

Thank you very much

4 Replies Last Post 15 mai 2019, 07:34 UTC−4
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 10 mai 2019, 07:49 UTC−4

Hi,

I would recommend to perform a mesh convergence study to find out what mesh resolution is needed for consistent results.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Hi, I would recommend to perform a mesh convergence study to find out what mesh resolution is needed for consistent results. Cheers Edgar
Alexis Prel
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 10 mai 2019, 08:13 UTC−4

I also recommend reading the Computing Accurate Fluxes section of the COMSOL reference manual it's a very interesting and useful read. You'll find the the reference manual at

/path/to/comsol/multiphysics/doc/pdf/COMSOL_multiphysics/

The file is

COMSOL_ReferenceManual.pdf
I also recommend reading the **Computing Accurate Fluxes** section of the COMSOL reference manual it's a very interesting and useful read. You'll find the the reference manual at /path/to/comsol/multiphysics/doc/pdf/COMSOL_multiphysics/ The file is COMSOL_ReferenceManual.pdf
Lyes Ifrek
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 13 mai 2019, 03:48 UTC−4

Thank you Edgar and Alexis for recommandations. I do that and I keep you informed. Lyes

Thank you Edgar and Alexis for recommandations. I do that and I keep you informed. Lyes
Lyes Ifrek
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 15 mai 2019, 07:34 UTC−4

Hello,

I tried reacf(V) on a known physic and I have the most accurate electrical current.

Thank you Alexis and Edgar Lyes

Hello, I tried reacf(V) on a known physic and I have the most accurate electrical current. Thank you Alexis and Edgar Lyes

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content