Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Layered Composite Structures for piezoelectric materials

Posted 2 avr. 2019, 16:43 UTC−4 Piezoelectric Devices, Materials Version 5.4 1 Reply

Akshayaa Pandiyan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello all,

I am very new to COMSOL and this might be a simple question. I am trying to simulate the piezoelectric voltage-charge behaviour of a PZT stack. Therefore, it has a alternative layered structure between PZT and substrate layers. I followed the video lesson in https://uk.comsol.com/video/modeling-layered-composite-structures-with-comsol-multiphysics-nov-29-2018, but the drop down menu from the solid mechanics doesnt support layered elastic material.

Is there another simplier way of simulating layered piezoelectric behaviour?

Thanks in advance! Akki.

1 Reply Last Post 3 avr. 2019, 08:51 UTC−4
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 3 avr. 2019, 08:51 UTC−4
Updated: 6 years ago 3 avr. 2019, 13:19 UTC−4

Hello Akshayaa,

The layered elastic material functionality is part of the optional Composite Materials Module. It looks like your license may not include that product. To check on that, within the software, please go to File > Licensed and User Products and you will see which products are and are not on your license currently. If you would like to discuss adding that product, contact your COMSOL representative. You can find their contact information on our contact page. Note, however, that the feature in question currently exists only for the Shell interface and does not currently support piezoelectricity modeling. The only way to model a piezo stack today is through many domains drawn stacked on top of each other in the Solid Mechanics interface. Note that the piezoelectricity capabilities are available in the Structural Mechanics Module and in the MEMS Module (Please refer to the Specification Chart to see exactly what's available in each of those two optional products).

Best regards,

Jeff

-------------------
Jeff Hiller
Hello Akshayaa, The layered elastic material functionality is part of the optional Composite Materials Module. It looks like your license may not include that product. To check on that, within the software, please go to File > Licensed and User Products and you will see which products are and are not on your license currently. If you would like to discuss adding that product, contact your COMSOL representative. You can find their contact information on [our contact page](http://www.comsol.com/contact/). Note, however, that the feature in question currently exists only for the Shell interface and does not currently support piezoelectricity modeling. The only way to model a piezo stack today is through many domains drawn stacked on top of each other in the Solid Mechanics interface. Note that the piezoelectricity capabilities are available in the Structural Mechanics Module and in the MEMS Module (Please refer to the [Specification Chart](https://www.comsol.com/products/specifications/) to see exactly what's available in each of those two optional products). Best regards, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content