Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Plotting average cross sectional values vs. length

Posted 29 juil. 2011, 18:41 UTC−4 Version 4.2 6 Replies

Weam Elsahar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am using COMSOL 4.1 to model the temperature distribution in engine exhaust pipes. The model includes air laminar flow inside the pipe & heat transfer in fluids (air).
I am interested in plotting the average cross sectional temperature of the pipe vs. the pipe length. I tried to create surfaces along the pipe & calculate the average over each surface this method is not convenient knowing that I need to plot the average temperature using the maximum pipe length resolution that I could obtain.
I think this should be a basic feature in COMSOL, so are there any suggestions to solve this problem?
6 Replies Last Post 13 avr. 2012, 18:52 UTC−4
Antoine Baudoin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 9 août 2011, 07:16 UTC−4
I have the same problem. Did you find a solution?
I have the same problem. Did you find a solution?
Alain Glière
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 9 août 2011, 07:28 UTC−4
You can use the projection operator to do this. In Model/Definitions/Model Coupling menu.
You can use the projection operator to do this. In Model/Definitions/Model Coupling menu.
Weam Elsahar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 9 août 2011, 08:09 UTC−4
not yet
not yet
Antoine Baudoin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 10 août 2011, 03:59 UTC−4

You can use the projection operator to do this. In Model/Definitions/Model Coupling menu.


The problem is that the projection operator works only for triangular and tetrahedral meshes.

" Note: It is only possible to use projection model coupling with simplex elements such
as triangles and tetrahedra. " (comsol user guide)

If your are simulating gas flow, you want to have boundary layers mesh elements. So, is there another way to do?
[QUOTE] You can use the projection operator to do this. In Model/Definitions/Model Coupling menu. [/QUOTE] The problem is that the projection operator works only for triangular and tetrahedral meshes. " Note: It is only possible to use projection model coupling with simplex elements such as triangles and tetrahedra. " (comsol user guide) If your are simulating gas flow, you want to have boundary layers mesh elements. So, is there another way to do?
ArseneNoume
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 10 janv. 2012, 05:13 UTC−5
I have exactly the same problem!
Did you solve it? How?

Thankyou
I have exactly the same problem! Did you solve it? How? Thankyou
Yatziri Rodríguez
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 13 avr. 2012, 18:52 UTC−4

You can use the projection operator to do this. In Model/Definitions/Model Coupling menu.


Hi Alain, could you please be more specific? I already tried so many times with that operator and read over and over the UNhelping help, and I still can't get COMSOL to do it. I try to get the average Temperature and Velocity as a function of length, so I need the average of those values on each dx "slice" of my 3D geometry. Thanks a lot!
[QUOTE] You can use the projection operator to do this. In Model/Definitions/Model Coupling menu. [/QUOTE] Hi Alain, could you please be more specific? I already tried so many times with that operator and read over and over the UNhelping help, and I still can't get COMSOL to do it. I try to get the average Temperature and Velocity as a function of length, so I need the average of those values on each dx "slice" of my 3D geometry. Thanks a lot!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content