Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

large deformation with the volume constant

Posted 28 juil. 2011, 21:32 UTC−4 Structural Mechanics Version 4.1 2 Replies

Lingyao Yu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I 'm trying to simulate the deformed cell with solid mechanics module. The volume of the cell should be kept constant during the cell deformation. However, the volume is always changed after calculated.

I have tried some methods, for example, I use nearly incompressible material and geometric nonlinearity in the linear elastic material model. Many warnings come to say 'inverted mesh' and I can not get the final results. I can not find a good way to keep the volume of the cell constant. So, could you give me some suggestions?






Regards
Lingyao
2 Replies Last Post 3 août 2011, 09:32 UTC−4
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 31 juil. 2011, 00:21 UTC−4
You should switch to a hyperelastic formulation in order to get a constant volume. The key is in the way different formulations calculate volumetric strain. The linear elastic material with geometric nonlinearity uses the Green-Lagrange strain. A zero volumetric (mean) Green-Lagrange strain does not mean zero volume change. Hyperelastic materials use the determinant of the deformation gradient as a measure of volumetric strain so zero strain means zero volume change.

Nagi Elabbasi
Veryst Engineering
You should switch to a hyperelastic formulation in order to get a constant volume. The key is in the way different formulations calculate volumetric strain. The linear elastic material with geometric nonlinearity uses the Green-Lagrange strain. A zero volumetric (mean) Green-Lagrange strain does not mean zero volume change. Hyperelastic materials use the determinant of the deformation gradient as a measure of volumetric strain so zero strain means zero volume change. Nagi Elabbasi Veryst Engineering
Lingyao Yu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 3 août 2011, 09:32 UTC−4

You should switch to a hyperelastic formulation in order to get a constant volume. The key is in the way different formulations calculate volumetric strain. The linear elastic material with geometric nonlinearity uses the Green-Lagrange strain. A zero volumetric (mean) Green-Lagrange strain does not mean zero volume change. Hyperelastic materials use the determinant of the deformation gradient as a measure of volumetric strain so zero strain means zero volume change.

Nagi Elabbasi
Veryst Engineering


Thanks very much!

Best regards
Lingyao
[QUOTE] You should switch to a hyperelastic formulation in order to get a constant volume. The key is in the way different formulations calculate volumetric strain. The linear elastic material with geometric nonlinearity uses the Green-Lagrange strain. A zero volumetric (mean) Green-Lagrange strain does not mean zero volume change. Hyperelastic materials use the determinant of the deformation gradient as a measure of volumetric strain so zero strain means zero volume change. Nagi Elabbasi Veryst Engineering [/QUOTE] Thanks very much! Best regards Lingyao

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content