Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Laminar flow and Joule Heating

Posted 19 juil. 2011, 13:33 UTC−4 Heat Transfer & Phase Change Version 4.4 4 Replies

Joseph Parisi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have a model where I'm trying to find the amount of heat produced by two electrodes in a microfluidic channel. When I create the model without laminar flow everything looks fine. The electrical current is flowing and increasing or decreasing the potential increases or decreases the temperature.

As soon as I add laminar flow, all of the velocity profiles look fine, but there is barely any heat generated. After a little searching I noticed the electrical conductivity of the fluid in the channel is no longer active in the material browser. Does this mean that while using the laminar flow model I cannot have electrical current through any of my fluids? Is there any way around this?

Thanks
4 Replies Last Post 18 déc. 2015, 10:20 UTC−5
Joseph Parisi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 1 août 2011, 15:42 UTC−4
Still can't get this to work, any help?
Still can't get this to work, any help?
Shoval Zoran
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 4 oct. 2011, 06:25 UTC−4
When I create the model without laminar flow everything looks fine. The electrical current is flowing and increasing or decreasing the potential increases or decreases the temperature.


Hi,
could you upload here the .mph file of the model without the laminar flow? I'm interested in seeing that. I don't know how to solve your problem though.

Thank you,
Shoval
[QUOTE]When I create the model without laminar flow everything looks fine. The electrical current is flowing and increasing or decreasing the potential increases or decreases the temperature. [/QUOTE] Hi, could you upload here the .mph file of the model without the laminar flow? I'm interested in seeing that. I don't know how to solve your problem though. Thank you, Shoval
Mindaugas Visockis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 18 déc. 2015, 06:00 UTC−5
Hi, I am also in face to this problem ....mph file will be very useful for me.

Thank You,

Mindaugas
Hi, I am also in face to this problem ....mph file will be very useful for me. Thank You, Mindaugas
Julien Givernaud
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 18 déc. 2015, 10:20 UTC−5
Hi,

Please post an mph file where we can see the problem

Best regards

Julien
Hi, Please post an mph file where we can see the problem Best regards Julien

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content