Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
problems with convection furnace
Posted 14 juin 2011, 11:42 UTC−4 1 Reply
Please login with a confirmed email address before reporting spam
hi,
I'm modeling a convection furnace. the expected heating time is around 6 hours. At this point every ingot in the oven should have reached the temperature 608 degrees celsius.
in my model it is almost immediately . I have no idea what I'm doing wrong. Can someone please give me a hint.
I'm modeling a convection furnace. the expected heating time is around 6 hours. At this point every ingot in the oven should have reached the temperature 608 degrees celsius.
in my model it is almost immediately . I have no idea what I'm doing wrong. Can someone please give me a hint.
Attachments:
1 Reply Last Post 14 juin 2011, 16:36 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
there can be many things: I would rank (as first guess)
- general units errors
- geometrical diimension (if you import the model this might change the default units)
- bad BC, absolute value instead of "density"
- bad material parameter
- wrong default temperature
...
Try to load your initial conditions too, and see if these are correct
--
Good luck
Ivar
there can be many things: I would rank (as first guess)
- general units errors
- geometrical diimension (if you import the model this might change the default units)
- bad BC, absolute value instead of "density"
- bad material parameter
- wrong default temperature
...
Try to load your initial conditions too, and see if these are correct
--
Good luck
Ivar