Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

CFD Model with trbolent flow

Posted 24 avr. 2011, 14:30 UTC−4 Fluid & Heat, Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD) Version 4.0a 1 Reply

Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Can anybody help me with turbulent flow model.

Badically I am working on Transient conjugate heat transfer turbulent flow model.
The error is : Segregated Group.

Your help in this regard is highly appreciable.

Ishant
1 Reply Last Post 25 avr. 2011, 04:24 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 25 avr. 2011, 04:24 UTC−4
Hi

the "old" V4.0 does not set up always all modules in the solver section, if you fiddle with your model, its worth to delete and regenerate your study regularly (but you loose the results and plot settings each time).

An advice: upgrade to V4.1 and you will be less frustrated.

--
Good luck
Ivar
Hi the "old" V4.0 does not set up always all modules in the solver section, if you fiddle with your model, its worth to delete and regenerate your study regularly (but you loose the results and plot settings each time). An advice: upgrade to V4.1 and you will be less frustrated. -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content