Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to induce pertubations in wave guide placed on a Piezoelectric crystal?

Posted 20 avr. 2011, 00:10 UTC−4 Structural Mechanics Version 3.5a 2 Replies

Sai Krishna Santosh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear Ivar Kjelberg ,

How can i induce the deformations in a wave guide placed on piezo crystal in structural mechanics(piezo solid) multiphysics?
2 Replies Last Post 21 avr. 2011, 01:51 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20 avr. 2011, 00:49 UTC−4
Hi

I would try either with a boundary load (force/pressure or via an electric excitation of the PZT, no ? Or have I missed something ?

--
Good luck
Ivar
Hi I would try either with a boundary load (force/pressure or via an electric excitation of the PZT, no ? Or have I missed something ? -- Good luck Ivar
Sai Krishna Santosh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21 avr. 2011, 01:51 UTC−4
Yes sir,
excitation of PZT through the electrodes, in the path excited surface waves i'll place the wave guide. The bottom of the wave guide will be in contact with the path, to induce the deformation of the path to the wave guide i should use boundary condition. Which constraint can be used ? Weather should i use continuity or prescribed displacement or any other condition.
Yes sir, excitation of PZT through the electrodes, in the path excited surface waves i'll place the wave guide. The bottom of the wave guide will be in contact with the path, to induce the deformation of the path to the wave guide i should use boundary condition. Which constraint can be used ? Weather should i use continuity or prescribed displacement or any other condition.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content