Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to call the sound speed in material in Global Definitions (Parameters)?

Posted 11 avr. 2011, 23:31 UTC−4 Version 4.1 1 Reply

Siu-Kit Lau
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear all,

I would like to create a geometry which the dimension is dependent on the speed of sound. I try to set a dimension in terms of root.mod1.mat1.def.c; however, it does not work. Do you know how to call the speed of sound in COMSOL?

Thanks and best regards,
S.K.
1 Reply Last Post 12 avr. 2011, 02:18 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 12 avr. 2011, 02:18 UTC−4
Hi

accessing the material properties is slihtly tricky, and if you change something int he materials, there are a fair chance that your link will change too. So "my way" is to simply define a Parameter and copy the numerical value in there, it's easier to control

--
Good luck
Ivar
Hi accessing the material properties is slihtly tricky, and if you change something int he materials, there are a fair chance that your link will change too. So "my way" is to simply define a Parameter and copy the numerical value in there, it's easier to control -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content